At present, the use of film blowing equipment is more and more widely, so how to correctly use the operation process of film blowing machine?
1. Before entering the work post, you should wear work clothes and work caps, and dress neatly and neatly.
2. There shall be no less than two operators on site when starting the machine. Before starting the machine, it is necessary to confirm that no one is in a dangerous position.
3. Check whether the safety protection devices of all parts of the equipment are in good condition, sensitive and reliable. The safety protection devices on the equipment are not allowed to be moved casually, and they are not allowed to be modified or deliberately disabled.
4. When the machine is running, it is forbidden to touch the rotating parts with hands to avoid accidents. If it is necessary to touch, it should work in the direction of running, and at least one person should be on the side of the patient.
5. Check whether the screws of each part of the film blowing machine are tightened and whether they are loose. If any abnormal or damaged parts are found, report to the foreman, and the foreman shall deal with them by himself or inform the maintenance personnel to deal with them.
6. When changing the network, it needs to stop. After 1-2 minutes, the network can be changed only after the pressure drops.
7. Adjust the set value of the temperature control meter according to the process requirements, and then use the glass thermometer to correct. When heating, the head of the film blowing machine should be heated first, and the other sections should be heated. The heat preservation time of the machine head is more than 1 hour, and that of other partitions is more than 20 minutes.
8. Pay attention to safe operation, and do not use any reason or excuse to make the operation mode that may cause personal injury or damage the equipment.